How To Install Wds Server 2012

In this post, I'll evidence yous how to setup WDS when there is a carve up DHCP server running on the network. This guide assumes you accept already configured a DHCP server with an active scope.

Prerequisites

Your car should meet the following requirements before WDS is configured.

1. Administrator account has a potent password.
2. Static IP is configured.
3. Latest windows updates are installed.
4. Firewall is turned off.

Installing Windows Deployment Server

Step one: Open the Server Manager Dashboard from the job bar. Click Manage and scroll to Add Roles and Features. Click onAdd together Roles and Features.

Step ii: Read the important notes and make sure you fulfill all of them earlier you lot continue. Then click Side by side.

Step iii: Choose Function-based or feature-based installation and click Next.

Step 4: Select the destination server on which you desire to install to WDS function and click Next.

Step 5: Choose Windows Deployment Services from server roles. As soon every bit you mark the check box, another small window volition pop up alerting you to install other required features as well along with WDS. Click onAdd Features.

Step six: Server roles, click Next to proceed.

Footstep 7: Features, clickNext.

Step eight: Note down the related notes and click Adjacent.

Step 9: Proceed default selections and click Adjacent.

Step ten: Confirm your installation selections and when you are washed, click Install.

Pace xi: When an installation is succeeded click Close.

Configuring Windows Deployment Server

Pace one: Open the Server Director Dashboard, click on Tool and scroll downwardly to Windows Deployment Services and click it.

Step ii: Right-click on your machine located under Servers. Scroll to Configure Server and click information technology.

Step 3: Before you continue farther read the requirements and make sure you meet them. Click Next.

Step iv: Cull Standalone server and click Next.

Step 5: Browse and cull the path on your drive where you would like to identify boot images, install images, PXE boot files, and other WDS tools. Click Side by side.

Footstep 6: Ignore the warning and click Yes.

Step 7: Choose Respond to all client computers (known and unknown) and click Next.

Step eight: Add together images to your WDS server by keeping Add images to the server now field checked. Click Finish.

Pace 9: Provide the path of your installation DVD which contains kick.wim and install.wim. Click Browse.

Step 10: Choose sources folder and click OK.

Step 11: Accept the path and click Next.

Step 12: Provide an image group name and click Next.

Step 13: Verify the information and click Next.

Step 14: Click Finish.

Step xv: Right-click Multicast Transmission, ringlet to Create Multicast Transmission and click it.

Step 16: Provide the proper noun of this transmission and click Next.

Step 17: Choose the image you lot would like to transmit using multicasting and click Next.

Step eighteen: Choose Auto-cast and click Next.

Stride 19: Click Finish.

Configuring DHCP Scope Options

Pace xx: Go to your DHCP server, expand IPv4 node. Right-click Scope Options and so click Configure Options.

Step 21: Locate choice 66 and check information technology. Provide an IP address of WDS server in String value and click OK.

Footstep 22: On DHCP server console, right-click your dhcp -> All Tasks -> click Restart.

Conclusion

You are done with configuring WDS and a scope pick on DHCP server. Restart your DHCP service. Take a client motorcar,  and boot it it trough the network kick pick and check that your configuration is working.

Source: https://www.faqforge.com/windows-server-2012-r2/setup-windows-deployment-services-separate-dhcp-windows-server-2012-r2/

Posted by: otiswitace.blogspot.com

Share this post