How To Install 12v Garden Lights

In this video, master electrician, Heath Eastman demonstrates how to install landscape lighting along a garden path.

Adding mural lighting to a walkway or path can improve the look and feel of the area. Once Heath figures out what kind of landscape lighting he wants, the location, and where the power source is located, he can so make the connections.

Heath uses a low voltage wire and decides to supplant the plastic connectors with brass connectors to make the connections last longer. He also installs a transformer so the homeowner can control when the lights power on and off.

Steps for Installing Landscape Lighting:

Step 1: Find your nearest power source

• This will be your starting point.
• Identify lights in desired locations.

Stride two: Run a low voltage cable

• Run a depression voltage cablevision in the trench simply do not bury. A low voltage cablevision is used as it is only 12v and if it accidentally gets cut, nobody volition get hurt.

Step iii: Starting time making connections

• Heath recommends a higher quality contumely connector considering the plastic ones that come up complimentary with the landscape wire are more susceptible to damage and corrosion.
• Cutting and strip the wire.
• Make the connection with the brass barrel connectors with an allen key. Earlier securing the second side slip the shrink sleeves over the barrels,
• Apply light rut to the sleeves

Stride 4: Install the transformer at the receptacle

Heath shows off the transformer that volition ability the mural lights he's installed. Because it will remain outdoors, he chose a roofing made of stainless steel.

Mike Last

• Take the low voltage cable and put ane wire in the hot concluding and one wire in the common terminal of the transformer. The transformer converts the power to low voltage and can control when the lights power on and off.
• Heath picked out a system that has a photocell that plugs into information technology. That way the lights come on at dusk and off at dawn. If you lot don't want the lights on all night you can add a timer to the system.
• Test the system.

Step v: Dig a pathway for the cable

• Apply a flat shovel to dig a 6" trench forth the pathway for the cable. This fashion it will be much easier to find if it ever needs to be dug upwardly and keeping it on the edge should protect it from getting cutting while gardening.
• Bury the cable to the lesser of the vi" mark. Hands will piece of work fine only if a tool is desired make sure it is blunt plenty to not pierce or damage the wire.

---

Resource:

Heath installed two dissimilar types of mural light fixtures that are both manufactured by Illumicare. The upward lights used to highlight the shrubs and the brick entrance are Jasper 12V Solid Blood-red Contumely LED Spot Lights, and the path lights are Misty 12V Small-scale Solid Red Brass LED Path Lights.

To coordinate the individual lights to turn on and off, Heath installed an To a higher place Grade RXT Series Transformer, which is manufactured by Focus Industries. The transformer comes with optional add-ons, such as the photograph-jail cell sensor, the timer, and the built-in wifi component.

To connect everything together, Heath used low voltage mural wiring and a shovel. Both of these items can be institute at home centers.

---

Materials:

• Landscape lights - pathway / uplight
• Depression voltage cable
• Transformer - optional add together-ons include photocell, timer, and born wifi component
• Contumely barrel connector

---

Tools:

Source: https://www.thisoldhouse.com/lighting/22217919/how-to-install-outdoor-landscape-lighting

Posted by: otiswitace.blogspot.com

Share this post